Hamilton's Most Trusted Ceramic Coating Service

MM Detailing applies professional-grade ceramic coating to protect your paint, repel water, and keep your car looking sharp for years. Serving Hamilton and surrounds.

Get a Free Quote Now

Or call now: +64224124024

Why Hamilton Car Owners Are Investing in Ceramic Coating

Hamilton weather is hard on paint. UV from long Waikato summers, bird droppings, road grime, and tree sap from suburban streets all degrade your clear coat over time. Once the damage is done, you are looking at paint correction or a respray. Ceramic coating stops that before it starts.

A ceramic coating bonds directly to your paint and creates a hard, hydrophobic layer that sheds water, resists contaminants, and blocks UV rays. Your car stays cleaner for longer between washes. The paint holds its depth and gloss. And when it comes time to sell, a well-maintained exterior adds real money to your trade-in or private sale value.

This is not a spray wax that washes off after a few weeks. A properly applied ceramic coating lasts years, not months. It is the most cost-effective long-term paint protection available for your vehicle.

Get a Free Quote Now

Real Ceramic Coating Results

Before Ceramic Coating BEFORE
After Ceramic Coating AFTER

Daily driver Mazda CX-5 with heavy swirl marks and faded clear coat, restored and coated with Pro Shield. Paint depth visibly recovered.

Ceramic Coating Packages

Choose the level of protection that's right for your vehicle.

Essential Protection

  • ✓ Full exterior decontamination wash
  • ✓ Iron fallout and tar removal
  • ✓ Paint surface prep and panel wipe-down
  • ✓ Single-layer ceramic coating applied to all exterior panels
  • ✓ Hydrophobic water-beading protection
  • ✓ UV and light contaminant resistance
Get a Free Quote
Most Popular

Pro Shield

  • ✓ Everything in Essential Protection
  • ✓ Light paint enhancement to reduce minor swirls before coating
  • ✓ Two-layer ceramic coating for increased hardness and depth
  • ✓ Glass treatment for improved water repellency and visibility
  • ✓ Wheel faces and arches coated
  • ✓ Extended protection life over single-layer application
Get a Free Quote

Elite Armor

  • ✓ Everything in Pro Shield
  • ✓ Full single-stage or multi-stage paint correction before coating
  • ✓ Three-layer ceramic coating for maximum hardness and gloss
  • ✓ Full wheel and caliper coating
  • ✓ Glass coating front and rear
  • ✓ Trim and plastic protection coating
  • ✓ Aftercare kit and maintenance guide included
Get a Free Quote

The Ceramic Coating Process

1

Initial Inspection and Quote

Maharlika assesses your vehicle's paint condition, flags any existing damage, and recommends the right protection tier for your car and budget. No surprises, no pressure.

15-20 mins
2

Full Decontamination Wash

Your car gets a thorough two-bucket wash to remove surface dirt, followed by a dedicated iron and fallout removal treatment. This step clears the paint of bonded contaminants that would otherwise sit beneath the coating.

45-60 mins
3

Clay Bar Decontamination

Every panel is clayed to remove embedded grit and industrial fallout that a wash alone cannot lift. The surface needs to be completely smooth before any coating goes on.

30-45 mins
4

Paint Correction (Where Applicable)

For Pro Shield and Elite Armor tiers, a machine polish removes swirl marks, light scratches, and oxidation. You coat clean, corrected paint, not paint that is already damaged. This step directly affects the final result.

1-4 hours depending on condition
5

Ceramic Coating Application

The ceramic coating is applied panel by panel in a controlled environment. Each layer is worked in and levelled before curing. No rushing, no shortcuts. The number of layers depends on your chosen tier.

1-2 hours
6

Cure Time and Final Inspection

The coating is left to cure and then inspected under lighting to confirm full, even coverage across every panel. You get a walkthrough of the result and a care guide before you drive away.

30-60 mins plus cure window
Get a Free Quote Now

Ceramic Coating FAQ

MM Detailing offers three tiers of ceramic coating protection, ranging from a single-layer essential application through to a full multi-layer system with paint correction included. Pricing depends on your vehicle size, paint condition, and the tier you choose. Get in touch for a free quote specific to your car.
A professionally applied ceramic coating typically lasts between two and five years depending on the product used, the number of layers, and how well it is maintained. The Elite Armor tier offers the longest protection life. Regular maintenance washes using pH-neutral products will extend the coating significantly.
For the Essential Protection tier, expect around three to four hours. Pro Shield and Elite Armor appointments take longer due to paint correction work and additional coating layers. Most vehicles are completed within a single day. You will need to avoid getting the car wet for 24 to 48 hours after application while the coating finishes curing.
Ceramic coating sits between wax and PPF in terms of protection. Wax sits on top of the paint and wears off within weeks. Ceramic coating chemically bonds to the clear coat and lasts years. Paint protection film offers physical impact protection that ceramic cannot. For most daily drivers in Hamilton who want long-term gloss, UV protection, and easy cleaning, ceramic coating is the right call. PPF is better suited to high-impact areas like bonnets and bumpers on newer or higher-value vehicles.
Yes. A coated car still needs regular washing, but it is significantly easier and less frequent than an uncoated vehicle. Use a pH-neutral car shampoo, avoid automatic car washes with brushes, and do not apply any wax or sealant on top of the coating. Maharlika provides a care guide with every ceramic coating job.
MM Detailing stands behind their work. Warranty terms vary by tier and product used, and will be outlined clearly before your booking is confirmed. Any concerns after the job are dealt with directly, no runaround. Ask about warranty details when you request your free quote.
It depends on the condition of your paint. Ceramic coating locks in whatever is underneath it. If your paint has swirl marks, light scratches, or oxidation, those will still be visible through the coating if they are not corrected first. For newer vehicles or paint in good condition, correction may not be necessary. Maharlika checks this during the initial inspection and will be straight with you about what your car actually needs.
Yes. MM Detailing services Hamilton, Cambridge, Tamahere, Raglan, Te Awamutu, Ohaupo, Ngarawahia, Morrinsville, Whatawhata, Horotiu, and Rukuhia. Get in touch to confirm availability in your area and lock in a time that suits you.

Your Paint Will Not Protect Itself

Get a free ceramic coating quote from MM Detailing and find out exactly what your car needs to stay protected for the next few years.

Or call now: +64224124024