Hamilton's Most Trusted Detailer

Hamilton's Paint Correction Specialists — Real Results

MM Detailing removes swirl marks, scratches, and dull paint from cars across Hamilton and the Waikato. Most jobs quoted within the hour.

Get a Free Quote Now

Or call now: +64224124024

Why Hamilton Car Owners Are Getting Paint Correction Done Now

Your paint is the first thing anyone notices. Swirl marks from automatic car washes, fine scratches from daily driving, and oxidation from Hamilton's sun and weather don't go away on their own. They build up. And the longer you leave them, the worse the damage gets.

Paint correction removes that damage at the source. Not covered up with a filler or wax. Actually removed. The result is paint that reflects cleanly, looks sharp under any light, and holds its value when it counts — at trade-in time, private sale, or just pulling up somewhere you want the car to look its best.

It's also the right step before applying any paint protection film or ceramic coating. Sealing in scratches defeats the purpose. Get the paint right first, then protect it.

Get a Free Quote Now

Real Paint Correction Results

Before Paint Correction BEFORE
After Paint Correction AFTER

Mazda CX-5 bonnet covered in swirl marks from years of automatic car washing — Single Stage correction, full gloss restored

Paint Correction Packages

Choose the level of protection that's right for your vehicle.

Single Stage

  • ✓ Full exterior wash and decontamination
  • ✓ Clay bar treatment to remove bonded surface contaminants
  • ✓ Single machine polish pass to reduce light swirl marks and fine scratches
  • ✓ Panel wipe-down to remove polish residue
  • ✓ Final inspection under detailing lights
  • ✓ Finishing wax or sealant applied for short-term protection
Get a Free Quote
Most Popular

Two Stage

  • ✓ Full exterior wash and iron fallout decontamination
  • ✓ Clay bar treatment across all painted panels
  • ✓ Heavy cut compound pass to remove deeper scratches and oxidation
  • ✓ Refining polish pass to restore gloss and remove compounding marks
  • ✓ Panel wipe-down and light inspection between stages
  • ✓ Finishing sealant or carnauba wax applied for protection
Get a Free Quote

Multi-Stage

  • ✓ Full strip wash, iron decontamination, and clay bar treatment
  • ✓ Paint depth gauge readings taken across all panels before work begins
  • ✓ Wet sanding where required for heavy oxidation or deep scratches
  • ✓ Multiple compound and polish passes tailored to each panel's condition
  • ✓ Rotary and dual-action machine polishing combined for maximum correction
  • ✓ Final refining stage to bring paint to its highest achievable gloss
  • ✓ Panel inspection under multiple light sources before sign-off
  • ✓ Finishing paint sealant applied to protect the corrected surface
Get a Free Quote

The Paint Correction Process

1

Wash and Decontamination

The car is given a full two-bucket wash followed by iron fallout remover and a clay bar treatment. This strips all bonded contamination from the surface so the machine polisher works directly on the paint, not on top of a layer of grime and overspray.

45-90 mins
2

Paint Inspection and Stage Assessment

Every panel is checked under high-intensity detailing lights to map out the type and depth of defects. A paint depth gauge is used to confirm there's enough clear coat to safely correct without thinning the paint. This step determines which correction tier is right for your car.

20-30 mins
3

Machine Polishing and Correction

The actual correction work. Compound and polish are worked into the paint using a machine polisher, removing swirl marks, scratches, water spots, and oxidation. Heavily affected areas get multiple passes. Each section is wiped clean and checked before moving to the next panel.

2-6 hours depending on tier and condition
4

Panel Wipe-Down and Final Inspection

All polish residue is removed with an IPA wipe-down so the paint can be assessed in its true state. Every panel goes back under the lights. Any areas that need a final refining pass get it here before the finishing product goes on.

30-45 mins
5

Finishing Protection Applied

A finishing wax, sealant, or coating is applied to protect the corrected paint. This gives the surface short-to-medium term protection while keeping the gloss locked in. If you're adding a ceramic coating after correction, this step is adjusted accordingly.

20-40 mins
Get a Free Quote Now

Paint Correction FAQ

MM Detailing offers three tiers: Single Stage, Two Stage, and Multi-Stage. The right tier depends on your car's condition, panel count, and how much correction the paint needs. Get a free quote and Maharlika will assess your car and give you a clear price before any work starts.
A Single Stage correction on a standard car typically takes 4-6 hours. A Two Stage job runs 6-8 hours. Multi-Stage work on heavily damaged or larger vehicles can take a full day or more. You'll get a time estimate when you receive your quote.
The correction itself is permanent — removed scratches and swirl marks don't come back on their own. How long the results stay that way depends on how the car is maintained. Proper hand washing and avoiding automatic car washes will keep corrected paint looking sharp for years.
Avoid automatic car washes — they're the main cause of swirl marks in the first place. Use the two-bucket hand wash method or a touchless wash. A spray detailer between washes helps maintain the finish. If a ceramic coating was applied after correction, follow the coating's specific care instructions.
The correction work is backed by a satisfaction guarantee. If something isn't right when you pick up the car, it gets fixed. Longevity of results depends on how the car is looked after post-service, which is why Maharlika walks every client through aftercare before the job is handed back.
A cut and polish from a quick detailer or car wash uses a one-size-fits-all approach — same product, same pad, same speed on every car. Machine paint correction is assessed and tailored to your specific paint. The right compound, pad, and machine speed are chosen based on your car's condition and clear coat thickness. The results are significantly better and much longer-lasting.
It removes scratches and swirl marks that sit within the clear coat layer. If you can feel a scratch with your fingernail, it's likely gone through into the base coat or primer, and correction alone won't fully remove it. Maharlika will tell you upfront what can and can't be corrected on your specific car.
Yes, if you want the results to last as long as possible. Paint correction brings your paint back to its best condition. A ceramic coating then seals that surface, making it far easier to maintain and much more resistant to new contamination, light scratches, and UV damage. The two services work best together.

Book Your Paint Correction in Hamilton Before the Waiting List Fills Up

Get a free quote from Maharlika today — most quotes are turned around within the hour.

Or call now: +64224124024